diy Home Network
Home 3D Design Basement Bathroom Kitchen Living Room Bedroom Landscape Deck Patio Pool Garden  

 

 

 

 

Home Design

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Online Design

 

 

 

 

 

 

 

 

 

Home Design

Basement Framing

 

 

 

Whether you're finishing an unfinished basement or just framing one individual wall, here are a few things that I would like you to keep in the back of your mind, while working on your project. Framing a new basement wall will not be complicated as long as you follow a few of these time-saving steps. Let's start with framing a simple wall that will be dividing a large room. Let's say that this wall is going to be 16 foot long and will have one doorway, located in the center. The first thing we're going to need to do is to get the building materials into the basement and this is where our first basement wall framing secret is going to save you time and frustration.

 

 

do it yourself

 

 

A lot of homes that have basements, have limited access or in other words, there is usually one stairway and this is the only access to the basement. If you're going to build a wall, the most important thing you need to remember, is to have all of your building materials, in the basement, before you start doing any work. Especially, the large stuff like drywall sheets or any long two by fours that will be used during construction. Sometimes, your new wall will create difficulties in maneuvering, large construction materials around. If however, you get all of your building materials in the basement, before you start working, you won't be boxed in or have a hard time maneuvering, some of these large building materials around.

 

 

Basement Ideas

 

 

Sometimes a little common sense can go a long way in the construction industry. Something else to think about, would be any large furniture, that might be staying in one of these rooms. I've have seen people build walls and doors only to find out later that the furniture won't fit through the new doorway. Try to think about as many problems as you possibly can and solve them before you start work on your new basement walls. If your home has an unfinished basement, you've probably thought about framing it at some point in time. If you have not, this article will introduce you to the benefits and drawbacks of the process. Finishing a basement is an excellent way to increase the value of your home and create more space that can be used for extra rooms like a recreation room, living room or a study.

Before constructing the framing for the interior and exterior walls, it is usually a good idea check for plumbing and wiring issues and make sure that both utilities will be available once the drywall is secured onto the framing. Once you have a good plan in place for the utilities, you can then go ahead and develop a floor plan and decide where the interior wall framing will be erected. Here are some questions you should ask yourself during the planning stage of the project: What will I use the rooms in the basement for? Would the space available be better suited for a family room, recreation room or home office? Do I want to spend extra time making the basement design look nice or just finish the walls with drywall?

 



3D Basement Design

 

 

3D Basement Design Online

 

Certain floor layouts, basement plans, and room sizes are better suited for specific uses. Framing basement walls is a difficult task if you choose not to plan first before you start working. If you have decided to put in some extra effort and make your basement warm and comfortable to sit in, the exterior walls should be constructed using 2x4 pieces of wood. The interior walls should be framed using the same materials in this case. This allows insulation to be placed between the studs which helps improve the energy efficiency of your home. If retaining heat isn't the focus of your design, drywall must still be screwed onto the exterior walls. Furring strips are another option and basically consist of 2x2 pieces glued and nailed to the unfinished walls.


Interior walls are constructed on the ground before they are lifted into position. It is extremely important to build them a little shorter than the measured height because all basement floors have slight variations here and there. Once the wall is erected, shimmies are then wedged in the excess space to hold the wall in position. If the framing is too tall, it will be very difficult to stand the frame up all the way up as it will get caught on ceiling joists. If your home is built on top of a layer of clay then the floor of your basement will experience swelling whenever there is heavy rainfall. In this case, L-shaped framing clips should be used to secure the walls to the floor joists. These clips give the walls some room to move without sacrificing support and strength.


 

 

Search:

 

Home | 3D Software | Bath | Bedroom | Basement | Living Room | Deck | Patio | Garden | Landscape | Kitchen | Contact | Privacy Policy | Site Map


DIY Home Network

DIY Home Network © 2010 - A Digital Design Space Inc. Company - All Rights Reserved