Cost to Build a House Roof

Skyrocketing building and materials prices are no doubt having a negative effect on the cost to repair your roof. As the sub prime crisis balloons into a mushroom cloud over the Western economies, costs are taking a beating. Your roof is the first thing to separate you from the elements and prices are going northward. For now, the cost to re-roof an average house can go from an average of $11,000 dollars up to a high cost of $25,000. The quality and type of materials used will make the price fluctuate up or down. The metal roof seems to be the most economical and can cost around $5,100 dollars to a high of $22,000 dollars. This is for a one story, ranch style house. If you use copper runs, the cost will jump up to a high of $39,600.

For a roof that will not be totally replaced, but only areas repaired, costs will be similar per square foot. Insurance may pay for some of this but if not, expect the prices to be higher than in the past. The metal roof may again, cost less than the traditional shingle roof. It will definitely cost less than a tile or slate roof. A one story house with a two car garage in Houston Texas with a metal gable roof can be covered completely with $11,100 dollars. You can divide that price by the area that is needing attention and come up with your own figure.

do it yourself

Roof Repair

If you happen to hire a roof repair company that does not carry liability insurance and one of their workers falls from your house or perhaps does damage to the neighbor's house or yard, you can be held liable. If this happens, you will see the dark side of repair costs and no doubt have a huge bill to pay.

If you are concerned about the rising cost of everything, including roof repair cost, it is time to remember the old saying; "An ounce of prevention is worth a pound of cure." Keep track of the condition of your roof and your costs will ultimately be lower.

Arthor and Source: Chad R. Fisher

Home Design Software for your PC

To have a house that one actually design and built according to one’s taste is practically everybody’s dream. Instead of just buying or renting a house that was already made, you would of course want something that you yourself have planned to suit your preferences. It is quite expensive to hire an architect to draft your plans, and it is also very hard to put what is on your mind on paper. Luckily such a predicament may be a thing of the past with the help of home design software.

Download Free 3D Home Design Software

How to Design a Roof

If you're looking for information on "how to design a roof", you probably know that a "rafter tail" is the end of the rafter that overhangs the wall. What you may not know is that the design you choose can determine whether you have a leaky roof edge or not. If you're going to attach a fascia board, you basically have two choices. Plumb cut rafter tails have a vertical fascia board.

Roof Designs with Square Cut Rafter Tails

Do It Yourself Roof Building

Whenever you begin in a building project you must get a permit from your local government. This will require a building plan. After you have your building plan and have received a permit you are ready to begin building. In the past it was necessary to build trusses by hand, however today most are pre-made and can be special ordered at a lumberyard or building supply store. This is the cheapest and easiest route for a do-it-yourselfer.

Step by Step How to Build a Roof

Building a Roof - Steps and Tips

The rains have stopped and the trees are all green. The sun shines bright and in some homes, the roof has once again begun to leak, just like last year. It is time to take a considered decision. Whether or not to go in for a roof replacement? It’s a tough decision, both from the time as well from the budgetary point of view. Depending upon the initial roofing for the house, yours may require roof repairs as well as replacement.

Step-by-Step Roof Building Guide and Plans